How To


The Hanging bracket must be mounted 20mm below the desired height of the mirror and in the centre of the mirrors desired position.

A hole between 30 and 50mm in diameter must be available in the wall exactly in the centre of the mirror. This hole will have the 240Vac power supply in the wall for the registered electrician to connect the mirror power cable too. The mirror’s power cable is always positioned in the exact centre of the rear of the mirror, unless otherwise requested in special circumstances.


Choose your mirror orientation
Enter your desired mirror size

Maximum mirror dimensions
Landscape - 2.2 x 1.0 | Portrait – 1.0 x 2.2
Your LED design

Select from the standard range

Upload your own LED design

File format needs to be a .ai or .eps. Not all designs can be successfully replicated on a mirror. UniLED will advise you on the suitability of your intended LED Design.
LED Backlighting
Would you like mirror backlighting? YesNo

Select the position

Select the colour

Select the sensor position
Choose your position of the sensor where there is a clear unobstructed area of 150mm. For the sensor to function correctly there must be at least 150mm between the sensor and any object like a wall, towel rail, vanity top etc.
Your contact details and special requests